mac

Commands for Debugging and Diagnosis for Packets Received and Sent by CPU
587
Chapter 61 Commands for Debugging
and Diagnosis for Packets Received
and Sent by CPU
61.1 clear cpu-rx-stat protocol
Command: clear cpu-rx-stat protocol[ <protocol-type> ]
Function: Clear the statistics of the CPU received packets of the protocol type.
Parameter: <protocol-type> is the type of the protocol of the packet, , including dot1x,
stp, snmp, arp, telnet, http, dhcp, igmp, ssh
Command Mode: Global Mode
Usage Guide: This command clear the statistics of the CPU received packets of the
protocol type, it is supposed to be used with the help of the technical support.
Example: Clear the statistics of the CPU receives ARP packets.
Switch(config)#clear cpu-rx-stat protocol arp
61.2 cpu-rx-ratelimit channel
This command is not supported by the switch.
61.3 cpu-rx-ratelimit enhanced
This command is not supported by the switch.
61.4 cpu-rx-ratelimit protocol
Command: cpu-rx-ratelimit protocol <protocol-type> <packets>
no cpu-rx-ratelimit protocol <protocol-type>
Function: Set the max rate of the CPU receiving packets of the protocol type, the no
command set the max rate to default.
Parameter: <protocol-type> is the type of the protocol, including dot1x, stp, snmp, arp,