mac

Commands for Debugging and Diagnosis for Packets Received and Sent by CPU
589
61.8 protocol filter
This command is not supported by the switch.
61.9 show cpu-rx protocol
Command: show cpu-rx protocol [ <protocol-type> ]
Function: Show the statistics of the CPU received packets of the specified protocol type.
Parameter: <protocol- type> is the protocol type of the packets, if do not input
parameters, show all statistic packets.
Command Mode: Admin and configuration mode
Default: None.
Usage Guide: This command is used to debug, it is supposed to be used with the help
of the technical support.
Example: Show the statistics of CPU receiving ARP packets.
Switch#show cpu-rx protocol arp
Type Rate-limit TotPkts CurState
arp 500 3 allowed