mac

Commands for Basic Switch Configuration
65
1.4.4 show private-mib oid
Command: show private-mib oid
Function: Show the original oid of the private mib.
Command mode: Admin and configuration mode.
Usage Guide: Check the beginning oid of the private mib by show private-mib oid
command.
Example: Show the original oid of the private mib.
Switch#show private-mib oid
Private MIB OID:1.3.6.1.4.1.6339
1.4.5 show snmp
Command: show snmp
Function: Display all SNMP counter information.
Command mode: Admin and Configuration Mode.
Example:
Switch#show snmp
0 SNMP packets input
0 Bad SNMP version errors
0 Unknown community name
0 Illegal operation for community name supplied
0 Encoding errors
0 Number of requested variables
0 Number of altered variables
0 Get-request PDUs
0 Get-next PDUs
0 Set-request PDUs
0 SNMP packets output
0 Too big errors (Max packet size 1500)
0 No such name errors
0 Bad values errors
0 General errors
0 Get-response PDUs
0 SNMP trap PDUs
Displayed information
Explanation