mac

Commands for Basic Switch Configuration
66
snmp packets input
Total number of SNMP packet inputs.
bad snmp version errors
Number of version information error
packets.
unknown community name
Number of community name error
packets.
illegal operation for community name
supplied
Number of permission for community
name error packets.
encoding errors
Number of encoding error packets.
number of requested variable
Number of variables requested by NMS.
number of altered variables
Number of variables set by NMS.
get-request PDUs
Number of packets received by “get”
requests.
get-next PDUs
Number of packets received by “getnext”
requests.
set-request PDUs
Number of packets received by “set”
requests.
snmp packets output
Total number of SNMP packet outputs.
too big errors
Number of “Too_ big” error SNMP
packets.
maximum packet size
Maximum length of SNMP packets.
no such name errors
Number of packets requesting for
non-existent MIB objects.
bad values errors
Number of “Bad_values” error SNMP
packets.
general errors
Number of “General_errors” error SNMP
packets.
response PDUs
Number of response packets sent.
trap PDUs
Number of Trap packets sent.
1.4.6 show snmp engineid
Command: show snmp engineid
Function: Display the engine ID commands.
Command Mode: Admin and Configuration Mode.
Example:
Switch#show snmp engineid
SNMP engineID:3138633303f1276c Engine Boots is:1
Displayed Information
Explanation