mac

Commands for Basic Switch Configuration
70
Command mode: Global Mode
Usage Guide: The switch supports up to 4 community strings. It can realize the
access-control for specifically community view by binding the community name to
specifically readable view or writable view.
Example:
Add a community string named “private” with read-write permission.
Switch(config)#snmp-server community rw 0 private
Add a community string named “public” with read-only permission.
Switch(config)#snmp-server community ro 0 public
Modify the read-write community string named “private” to read-only.
Switch(config)# snmp-server community ro 0 private
Delete community string “private”.
Switch(config)#no snmp-server community 0 private
Bind the read-only community string “public” to readable view “pviewr”.
Switch(config)#snmp-server community ro 0 public read pviewr
Bind the read-write community string “private” to readable view “pviewr” and writable
view “pvieww”.
Switch(config)#snmp-server community rw 0 private read pviewr write pvieww
1.4.13 snmp-server enable
Command: snmp-server enable
no snmp-server enable
Function: Enable the SNMP proxy server function on the switch. The “no snmp-server
enable” command disables the SNMP proxy server function
Command mode: Global mode
Default: SNMP proxy server function is disabled by system default.
Usage guide: To perform configuration management on the switch with network manage
software, the SNMP proxy server function has to be enabled with this command.
Example: Enable the SNMP proxy server function on the switch.
Switch(config)#snmp-server enable
1.4.14 snmp-server enable traps
Command: snmp-server enable traps
no snmp-server enable traps
Function: Enable the switch to send Trap message; the “no snmp-server enable traps”
command disables the switch to send Trap message.
Command mode: Global Mode