mac

Commands for Cluster
92
----in a member ----------------------------
Switch#show cluster
Status: Enabled
Cluster VLAN: 1
Role: Member
Commander Ip Address: 10.254.254.1
Internal Ip Address: 10.254.254.2
Commamder Mac Address: 00-12-cf-39-1d-90
---- a candidate ----------------------------
Switch#show cluster
Status: Enabled
Cluster VLAN: 1
Role: Candidate
---- disabled ----------------------------
Switch#show cluster
Status: Disabled
2.15 show cluster members
Command: show cluster members [id <member-id> | mac-address <mac-addr>]
Function: Display member information of a cluster. This command can only apply to
commander switches.
Parameters: member-id: member id of the switch.
mac-addr: the CPU mac addresses of member switches.
Default: No parameters means to display information of all member switches.
Command Mode: Admin and Configuration Mode.
Usage Guide: Executing this command on a commander switch will display the
configuration information of all cluster member switches.
Example: Execute this command on a commander switch to display the configuration
information of all and specified cluster member switches.
Switch#show cluster members
Switch#show cluster members id 1