mac

106
3.4 Commands for ULDP
3.4.1 debug uldp error
Command: debug uldp error
no debug uldp error
Function: Enable the error message debug function, the no form command disable the
function.
Parameter: None.
Command mode: Admin Mode.
Default: Disabled.
Usage Guide: Use this command to display the error message.
Example: Display the error message.
Switch#debug uldp error
3.4.2 debug uldp event
Command: debug uldp event
no debug uldp event
Function: Enable the message debug function to display the event; the no form
command disables this function.
Parameter: None.
Command mode: Admin Mode.
Default: Disabled.
Usage Guide: Use this command to display all kinds of event information.
Example: Display event information.
Switch#debug uldp event
3.4.3 debug uldp fsm interface ethernet
Command: debug uldp fsm interface ethernet <IFname>
no debug uldp fsm interface ethernet <IFname>
Function: To enable debugging information for ULDP for the specified interface. The no
form of this command will disable the debugging information.
Parameters: <IFname> is the interface name.
Command mode: Admin Configuration Mode.
Default: Disabled by default.