mac

108
will restore the normal mode.
Parameters: None.
Command mode: Global Configuration Mode and Port Configuration Mode.
Default: Normal mode.
Usage Guide: The ULDP working mode can be configured only if it is enabled globally.
When ULDP aggressive mode is enabled globally, all the existing fiber ports will work in
aggressive mode. For the copper ports and fiber ports which are available after the
configuration is available, aggressive mode should be enabled in port configuration mode.
Example: To enable ULDP aggressive mode globally.
Switch(config)#uldp aggressive-mode
3.4.7 uldp enable
Command: uldp enable
Function: ULDP will be enabled after issuing this command. In global configuration mode,
this command will enable ULDP for the global. In port configuration mode, this command
will enable ULDP for the port.
Parameters: None.
Command mode: Global Configuration Mode and Port Configuration Mode.
Default: By default ULDP is not configured.
Usage Guide: ULDP can be configured for the ports only if ULDP is enabled globally. If
ULDP is enabled globally, it will be effect for all the existing fiber ports. For copper ports
and fiber ports which are available after ULDP is enabled, this command should be issued
in the port configuration mode to make ULDP be effect.
Example: Enable ULDP in global configuration mode.
Switch(config)#uldp enable
3.4.8 uldp disable
Command: uldp disable
Function: To disable ULDP configuration through this command.
Parameters: None.
Command mode: Global Configuration Mode and Port Configuration Mode.
Default: By default ULDP is not configured.
Usage Guide: When ULDP is disabled globally, then ULDP in all the ports will be
disabled.
Example: To disable the ULDP configuration in global configuration mode.
Switch(config)#uldp disable