mac

109
3.4.9 uldp hello-interval
Command: uldp hello-interval <integer>
no uldp hello-interval
Function: To configure the interval for ULDP to send hello messages. The no form of this
command will restore the default interval for the hello messages.
Parameters: The interval for the Hello messages, with its value limited between 5 and
100 seconds, 10 seconds by default.
Command mode: Global Configuration Mode.
Default: 10 seconds by default.
Usage Guide: Interval for hello messages can be configured only if ULDP is enabled
globally, its value limited between 5 and 100 seconds.
Example: To configure the interval of Hello messages to be 12 seconds.
Switch(config)#uldp hello-interval 12
3.4.10 uldp manual-shutdown
Command: uldp manual-shutdown
no uldp manual-shutdown
Function: To configure ULDP to work in manual shutdown mode. The no command will
restore the automatic mode.
Parameters: None.
Command mode: Global Configuration Mode.
Default: Auto mode.
Usage Guide: This command can be issued only if ULDP has been enabled globally.
Example: To enable manual shutdown globally.
Switch(config)#uldp manual-shutdown
3.4.11 uldp recovery-time
Command: uldp recovery-time<integer>
no uldp recovery-time
Function: To configure the interval for ULDP recovery timer. The no form of this command
will restore the default configuration.
Parameters: recovery-time is the time out value for the ULDP recovery timer. Its value is
limited between 30 and 86400 seconds.
Command mode: Global Configuration Mode.
Default: 0 is set by default which means the recovery is disabled.