mac

117
debug lldp packets interface Ethernet1/3
debug lldp packets interface Ethernet1/4
debug lldp packets interface Ethernet1/5
=============END OF DEBUG SETTINGS===============
3.5.16 show lldp
Command: show lldp
Function: Display the configuration information of global LLDP, such as the list of all the
ports with LLDP enabled, the interval of sending update messages, the configuration of
aging time, the interval needed by the sending module to wait for re-initialization, the
interval of sending TRAP, the limitation of the number of the entries in the Remote Table.
Parameters: None.
Default: Do not display the configuration information of global LLDP.
Command mode: Admin Mode, Global Mode.
Usage Guide: Users can check all the configuration information of global LLDP by using
―show lldp‖.
Example: Check the configuration information of global LLDP after it is enabled on the
switch.
Switch(config)#show lldp
-----LLDP GLOBAL INFORMATIONS-----
LLDP enabled port : Ethernet 1/1
LLDP interval :30
LLDP txTTL :120
LLDP txShutdownWhile :2
LLDP NotificationInterval :5
LLDP txDelay :20
-------------END------------------
3.5.17 show lldp interface ethernet
Command: show lldp interface ethernet <IFNAME>
Function: Display the configuration information of LLDP on the port, such as: the working
state of LLDP Agent.
Parameters: <IFNAME>: Interface name.
Default: Do not display the configuration information of LLDP on the port.
Command mode: Admin Mode, Global Mode.
Usage Guide: Users can check the configuration information of LLDP on the port by