mac

118
using ―show lldp interface ethernet XXX‖.
Example: Check the configuration information of LLDP on the port after LLDP is enabled
on the switch.
Switch(config)#show lldp interface ethernet 1/1
Port name: ethernet 1/1
LLDP Agent Adminstatus: Both
LLDP Operation TLV: portDecs sysName sysDesc sysCap
LLDP Trap Status: disable
LLDP maxRemote: 100
LLDP Overflow handle: discard
LLDP interface remote status : Full
3.5.18 show lldp neighbors interface ethernet
Command: show lldp neighbors interface ethernet < IFNAME >
Function: Display the LLDP neighbor information of the port.
Parameters: None.
Default: Do not display the LLDP neighbor information of the port.
Command mode: Admin Mode, Global Mode.
Usage Guide: Users can check the LLDP neighbor information of the port by using ―show
lldp neighbors interface ethernet XXX‖.
Example: Check the LLDP neighbor information of the port after LLDP is enabled on the
port.
Switch(config)#show lldp neighbors interface ethernet 1/1
3.5.19 show lldp traffic
Command: show lldp traffic
Function: Display the statistics of LLDP data packets.
Parameters: None.
Default: Do not display the statistics of LLDP data packets.
Command mode: Admin Mode, Global Mode.
Usage Guide: Users can check the statistics of LLDP data packets by using ―show lldp
traffic‖.
Example: Check the statistics of LLDP data packets after LLDP is enabled on the switch.
Switch(config)#show lldp traffic
PortName Ageouts FramesDiscarded FramesInErrors FramesIn FramesOut
TLVsDiscarded TLVsUnrecognized -------------- ------- ---------------