mac

127
3.8 Commands for EFM OAM
3.8.1 clear ethernet-oam
Command: clear ethernet-oam [interface {ethernet |} <IFNAME>]
Function: Clear the statistic information of packets and link event on specific or all ports
for OAM.
Parameters: <IFNAME>, the name of the port needs to clear OAM statistic information
Command mode: Admin mode
Default: N/A.
Usage Guide: N/A.
Example: Clear the statistic information of OAM packets and link event on all ports.
Switch(config)#clear ethernet-oam
3.8.2 debug ethernet-oam error
Command: debug ethernet-oam error [interface {ethernet |} <IFNAME>]
no debug ethernet-oam error [interface {ethernet |} <IFNAME>]
Function: Enable the debugging of OAM error information, no command disables it.
Parameters: <IFNAME>: name of the port that the debugging will be enabled or disabled.
Command mode: Admin mode
Default: Disable.
Usage Guide: N/A.
Example: Enable the debugging of OAM error information for ethernet1/1.
Switch#debug ethernet-oam error interface ethernet1/1
3.8.3 debug ethernet-oam fsm
Command: debug ethernet-oam fsm {all | Discovery | Transmit} [interface {ethernet
|} <IFNAME>]
no debug ethernet-oam fsm {all | Discovery | Transmit} [interface {ethernet |}
<IFNAME>]
Function: Enable the debugging of OAM state machine, no command disables it.
Parameters: <IFNAME>: name of the port that the debugging will be enabled or disabled
Command mode: Admin mode
Default: Disable.
Usage Guide: N/A.