mac

129
Parameters: None.
Command mode: Port mode
Default: Disable.
Usage Guide: N/A.
Example: Enable ethernet-oam of Ethernet 1/4.
Switch(config)#interface ethernet 1/4
Switch(Config-If-Ethernet1/4)#ethernet-oam
3.8.7 ethernet-oam errored-frame threshold high
Command: ethernet-oam errored-frame threshold high {<high-frames> | none}
no ethernet-oam errored-frame threshold high
Function: Configure the high threshold of errored frame event, no command restores the
default value.
Parameters: <high-frames>, the high detection threshold of errored frame event,
ranging from 2 to 4294967295.
none, cancel the high threshold configuration.
Command mode: Port mode
Default: none.
Usage Guide: During the specific detection period, serious link event is induced if the
number of errored frame is larger than or equal to the high threshold and the device
notifies the peer by sending Information OAMPDU of which the value of Link Fault flag in
Flags field is 1. Note that the high threshold can not be less than the low threshold.
Example: Configure the high threshold of errored frame event on Ethernet 1/4 to 3000.
Switch(Config-If-Ethernet1/4)#ethernet-oam errored-frame threshold high 3000
3.8.8 ethernet-oam errored-frame threshold low
Command: ethernet-oam errored-frame threshold low <low-frames>
no ethernet-oam errored-frame threshold low
Function: Configure the low threshold of errored frame event, no command restores the
default value.
Parameters: <low-frames>, the low detection threshold of errored frame event, ranging
from 1 to 4294967295.
Command mode: Port mode
Default: 1.
Usage Guide: During the specific detection period, errored frame event is induced if the
number of errored frame is larger than or equal to the low threshold and the device notifies