mac

130
the peer by sending event notification OAMPDU. Note that the low threshold can not be
larger than the high threshold.
Example: Configure the low threshold of errored frame event on Ethernet 1/4 to 100.
Switch(Config-If-Ethernet1/4)#ethernet-oam errored-frame threshold low 100
3.8.9 ethernet-oam errored-frame window
Command: ethernet-oam errored-frame window <seconds>
no ethernet-oam errored-frame window
Function: Configure the detection period of errored frame event, no command restores
the default value.
Parameters: <seconds>, the detection period value of errored frame event, ranging from
1 to 60 seconds.
Command mode: Port mode
Default: 1.
Usage Guide: Detect the errored frame number of the port after the time of specific
detection period. If the number of errored frame is larger than or equal to the threshold,
bring the corresponding event and notify the peer through OAMPDU.
Example: Configure the detection period of errored frame event on port1/4 to 20s.
Switch(Config-If-Ethernet1/4)#ethernet-oam errored-frame window 20
3.8.10 ethernet-oam errored-frame-period threshold
high
Command: ethernet-oam errored-frame-period threshold high {<high-frames> |
none}
no ethernet-oam errored-frame-period threshold high
Function: Configure the high threshold of errored frame period event, no command
restores the default value.
Parameters: <high-frames>, the high detection threshold of errored frame period event,
ranging from 2 to 4294967295.
none, cancel the high threshold configuration.
Command mode: Port mode
Default: none.
Usage Guide: During the specific detection period, serious link event is induced if the
number of errored frame is larger than or equal to the high threshold and the device
notifies the peer by sending Information OAMPDU of which the value of Link Fault flag in