mac

132
detection period of errored frame period event(s)÷(64×8), of which the detection period
is the number of seconds in window of the configuration.
Example: Configure the detection period of errored frame period event on port 1/4 to 10s.
Switch(Config-If-Ethernet1/4)#ethernet-oam errored-frame-period window 10
3.8.13 ethernet-oam errored-frame-seconds threshold
high
Command: ethernet-oam errored-frame-seconds threshold high {<high-seconds> |
none}
no ethernet-oam errored-frame-seconds threshold high
Function: Configure the high threshold of errored frame seconds event, no command
restores the default value.
Parameters: <high-seconds>, the high detection threshold of errored frame seconds
event, ranging from 2 to 65535 seconds.
none, cancel the high threshold configuration.
Command mode: Port mode
Default: none.
Usage Guide: During the specific detection period, serious link event is induced if the
number of errored frame seconds is larger than or equal to the high threshold and the
device notifies the peer by sending Information OAMPDU of which the value of Link Fault
flag in Flags field is 1. Note that the high threshold should not be less than the low
threshold. The definition of errored frame seconds is the second in which errored frame is
received.
Example: Configure the high threshold of errored frame seconds event on port 1/4 to
3000.
Switch(Config-If-Ethernet1/4)#ethernet-oam errored-frame-seconds threshold high 3000
3.8.14 ethernet-oam errored-frame-seconds threshold
low
Command: ethernet-oam errored-frame-seconds threshold low <low-seconds>
no ethernet-oam errored-frame-seconds threshold low
Function: Configure the low threshold of errored frame seconds event, no command
restores the default value.
Parameters: <low-seconds>, the low detection threshold of errored frame seconds
event, ranging from 1 to 65535 seconds.