mac

133
Command mode: Port mode
Default: 1.
Usage Guide: During the specific detection period, errored frame seconds event is
induced if the number of errored frame seconds is larger than or equal to the low threshold
and the device notifies the peer by sending event notification OAMPDU. Note that the low
threshold should not be larger than the high threshold. The definition of errored frame
seconds is the second in which errored frame is received.
Example: Configure the low threshold of errored frame seconds event on port 1/4 to 100.
Switch(Config-If-Ethernet1/4)#ethernet-oam errored-frame-seconds threshold low 100
3.8.15 ethernet-oam errored-frame-seconds window
Command: ethernet-oam errored-frame-seconds window <seconds>
no ethernet-oam errored-frame-seconds window
Function: Configure the detection period of errored frame seconds event, no command
restores the default value.
Parameters: <seconds>, the detection period value of errored frame seconds event,
ranging from 10 to 900 secods.
Command mode: Port mode
Default: 60.
Usage Guide: Detect errored frame seconds of the port after the time of specific detection
period. If the number of errored frame seconds is larger than or equal to the threshold,
corresponding event is induced and the device notified the peer through OAMPDU.
Example: Configure the detection period of errored frame seconds event on port 1/4 to
120s.
Switch(Config-If-Ethernet1/4)#ethernet-oam errored-frame-seconds window 120
3.8.16 ethernet-oam errored-symbol-period threshold
high
Command: ethernet-oam errored-symbol-period threshold high {<high-symbols> |
none}
no ethernet-oam errored-symbol-period threshold high
Function: Configure the high threshold of errored symbol event, no command restores
the default value.
Parameters: <high-symbols>, the high detection threshold of errored symbol event,
ranging from 2 to 18446744073709551615 symbols.