mac

134
none, cancel the high threshold configuration.
Command mode: Port mode
Default: none.
Usage Guide: During the specific detection period, serious link event is induced if the
number of errored symbols is larger than or equal to the high threshold and the device
notifies the peer by sending Information OAMPDU of which the value of Link Fault flag in
Flags field is 1. Note that the high threshold should not be less than the low threshold.
Example: Set the high threshold of errored symbol event on port 1/4 to none.
Switch(Config-If-Ethernet1/4)#ethernet-oam errored-symbol-period threshold high none
3.8.17 ethernet-oam errored-symbol-period threshold
low
Command: ethernet-oam errored-symbol-period threshold low <low-symbols>
no ethernet-oam errored-symbol-period threshold low
Function: Configure the low threshold of errored symbol event, no command restores the
default value.
Parameters: <low-symbols>, the low threshold of errored symbol event, ranging from 1
to 18446744073709551615 symbols.
none, cancel the high threshold configuration.
Command mode: Port mode
Default: 1.
Usage Guide: During the specific detection period, errored symbol event is induced if the
number of errored symbols is larger than or equal to the low threshold and the device
notifies the peer by sending event notification OAMPDU. Note that the low threshold
should not be larger than the high threshold.
Example: Set the low threshold of errored symbol event on port 1/4 to 5.
Switch(Config-If-Ethernet1/4)#ethernet-oam errored-symbol-period threshold low 5
3.8.18 ethernet-oam errored-symbol-period window
Command: ethernet-oam errored-symbol-period window <seconds>
no ethernet-oam errored-symbol-period window
Function: Configure the detection period of errored symbol event, no command restores
the default value.
Parameters: <seconds>, the detection period value of errored symbol event, ranging
from 1 to 60s.