mac

139
oam_status
Status of Ethernet OAM:
enable, OAM is enabled;
disable, OAM is not enabled.
local _mode
Working mode of Ethernet OAM:
active, the port is set as active mode;
passive, the port is set as passive mode.
Period
Transmission period of packets
Timeout
Timeout of connection
local_pdu
The way in which the local end processes Ethernet
OAMPDUs:
RX_INFO, the port only receives Information OAMPDUs and
does not send any Ethernet OAMPDUs.
LF_INFO, the port only sends Information OAMPDU packets
without Information TLV and with their link error flag bits
being set.
INFO, the port only sends and receives Information
OAMPDU packets.
ANY, the port sends and receives any OAMPDU packets.
local_mux_action
Working mode of the local transmitter:
FWD, the port can send any packets;
DISCARD, the port only sends OAMPDU packets and
discards others.
local_par_action
Working mode of the local receiver in the following:
FWD, receiving any packets is allowed;
DISCARD, only OAMPDU packets is received while others
are discarded;
LB, OAM remote loopback is enabled on the port. In this
case, all the packets except OAMPDU packets received are
returned to their sources along the ways they come.
Loopback Supported
Whether support remote loopback: YES for support and NO
for not.
Unidirectional Support
Whether support unidirectional transmission: YES for
support and NO for not.
Link Events
Whether support general link events: YES for support and
NO for not.
Remote Failure
Whether support severe link events (remote failure
indication): YES for support and NO for not.