mac

175
5.2.4 mac-address-table synchronizing enable
Command: mac-address-table synchronizing enable
no mac-address-table synchronizing enable
Function: Enable the monitor function for MAC, if a MAC is added or deleted, the system
will report this monitored event; the no command will cancel this function.
Parameter: None.
Command mode: Global Mode.
Default: Disable.
Usage Guide: The user enables this function to obtain the status of the MAC changing or
the accessed user.
Example: Enable the monitor function for MAC.
Switch(Config)#mac-address-table synchronizing enable
5.2.5 show port-security
Command: show port-security
Function: Display the secure MAC addresses of the port.
Command mode: Admin and Configuration Mode.
Default: The switch is not display port-security configuration.
Usage Guide: This command displays the secure port MAC address information.
Example:
Switch#show port-security
Security Port MaxSecurity Addr CurrentAddr Security Action
(count) (count)
-----------------------------------------------------------------------------------------------------
Ethernet1/1 1 1 Protect
Ethernet1/3 10 1 Protect
Ethernet1/5 1 0 Protect
-----------------------------------------------------------------------------------------------------
Max Addresses limit in System:128
Total Addresses in System:2
Displayed information
Explanation
Security Port
Is port enabled as a secure port.
MaxSecurityAddr
The maximum secure MAC address number set for the
security port.