mac

225
Parameter: None
Command Mode: Admin Mode
Default: None
Usage Guide: This command can not clear static neighbor.
Example: Clear neighbor list.
Switch#clear ipv6 neighbors
10.2.2 debug ip packet
Command: debug ip packet
no debug ip packet
Function: Enable the IP packet debug Function: the ―no debug IP packet‖ command
disables this debug function.
Parameter: None
Default: IP packet debugging information is disabled by default.
Command mode: Admin Mode
Usage Guide: Displays statistics for IP packets received/sent, including
source/destination address and bytes, etc.
Example: Enable IP packet debug.
Switch #debug ip packet
IP PACKET: sent, src 200.1.1.35, dst 224.0.0.9, size 312, proto 17, vrf 0
IP PACKET: rcvd, src 101.1.1.1, dst 224.0.0.9, size 312, proto 17, from Vlan200, vrf 0
10.2.3 debug ipv6 packet
Command: debug ipv6 packet
no debug ipv6 packet
Function: IPv6 data packets receive/send debug message.
Parameter: None
Default: None
Command Mode: Admin Mode
Usage Guide:
Example:
Switch#debug ipv6 packet
IPv6 PACKET: rcvd, src <fe80::203:fff:fe01:2786>, dst <fe80::1>, size <64>, proto <58>,
from Vlan1
Displayed information
Explanation
IPv6 PACKET: rcvd
Receive IPv6 data report