mac

226
Src <fe80::203:fff:fe01:2786>
Source IPv6 address
Dst <fe80::1>
Destination IPv6 address
size <64>
Size of data report
proto <58>
Protocol field in IPv6 header
from Vlan1
IPv6 data report is collected from Layer 3
port vlan1
10.2.4 debug ipv6 icmp
Command: debug ipv6 icmp
no debug ipv6 icmp
Function: ICMP data packets receive/send debug message.
Parameter: None
Default: None
Command Mode: Admin Mode
Usage Guide: None
Example:
Switch#debug ipv6 icmp
IPv6 ICMP: sent, type <129>, src <2003::1>, dst <2003::20a:ebff:fe26:8a49> from Vlan1
Displayed information
Explanation
IPv6 ICMP: sent
Send IPv6 data report
type <129>
Ping protocol No.
src <2003::1>
Source IPv6 address
dst <2003::20a:ebff:fe26:8a49>
Destination IPv6 address
from Vlan1
Layer 3 port being sent
10.2.5 debug ipv6 nd
Command: debug ipv6 nd [ns | na | rs | ra | redirect]
no debug ipv6 nd [ ns | na | rs | ra | redirect ]
Function: Enable the debug of receiving and sending operations for specified types of
IPv6 ND messages. The ns, na, rs, ra and redirect parameters represent neighbor
solicitation, neighbor advertisement, route solicitation, route advertisement and route
redirect. No specification means to enable the debug for all five types of ND message.
The no operation of this command will disable debug of receiving and sending operations