mac

240
10.3.3 clear arp traffic
Command: clear arp traffic
Function: Clear the statistic information of ARP messages of the switch. For box switches,
this command will only clear statistics of APP messages received and sent from the
current boardcard.
Command mode: Admin Mode
Example:
Switch#clear arp traffic
10.3.4 debug arp
Command: debug arp {receive|send|state}
no debug arp {receive|send|state}
Function: Enables the ARP debugging function; the ―no debug arp
{receive|send|state}‖ command disables this debugging function.
Parameter: receive the debugging-switch of receiving ARP packets of the switch; send
the debugging-switch of sending ARP packets of the switch; state the debugging-switch of
APR state changing of the switch.
Default: ARP debug is disabled by default.
Command mode: Admin Mode.
Usage Guide: Display contents for ARP packets received/sent, including type, source and
destination address, etc.
Example: Enable ARP debugging.
Switch#debug arp receive
%Jan 01 01:05:53 2006 IP ARP: rcvd, type REQUEST, src 172.16.1.251,
00-e0-4c-88-ad-bc, dst 172.16.1.110, 00-00-00-00-00-00 flag 0x0, pkt type 1, intf Vlan100.
%Jan 01 01:05:53 2006 IP ARP: rcvd, type REQUEST, src 172.16.1.251,
00-e0-4c-88-ad-bc, dst 172.16.1.110, 00-00-00-00-00-00 flag 0x0, pkt type 1, intf Vlan100.
e%Jan 01 01:05:53 2006 IP ARP: rcvd, type REQUEST, src 172.16.1.251,
00-e0-4c-88-ad-bc, dst 172.16.1.110, 00-00-00-00-00-00 flag 0x0, pkt type 1, intf Vlan100.
%Jan 01 01:05:53 2006 IP ARP: rcvd, type REQUEST, src 172.16.1.251,
00-e0-4c-88-ad-bc, dst172.16.1.110, 00-00-00-00-00-00 flag 0x0, pkt type 1, intf Vlan100.
10.3.5 ip proxy-arp
This command is not supported by the switch.