mac

272
16.3 debug ipv6 dhcp client packet
Command: debug ipv6 dhcp client {event | packet}
no debug ipv6 dhcp client {event | packet}
Function: To enable the debugging messages for protocol packets of DHCPv6 prefix
delegation client, the no form of this command will disable the debugging information.
Default: Disabled.
Command Mode: Admin Mode.
Example:
Switch# debug ipv6 dhcp client packet
16.4 debug ipv6 dhcp detail
Command: debug ipv6 dhcp detail
no debug ipv6 dhcp detail
Function: To display the debug information of all kinds of packets received or sent by
DHCPv6, the no form of this command disabled this function.
Default: Disabled.
Command Mode: Admin Mode.
Example:
Switch# debug ipv6 dhcp detail
16.5 debug ipv6 dhcp relay packet
Command: debug ipv6 dhcp relay packet
no debug ipv6 dhcp relay packet
Function: To enable the debugging information for protocol packets of DHCPv6 relay, the
no form of this command will disable the debugging.
Default: Disabled.
Command Mode: Admin Mode.
Example:
Switch# debug ipv6 dhcp relay packet
16.6 debug ipv6 dhcp server
Command: debug ipv6 dhcp server { event | packet }