mac

34
1.1.7 debug ssh-server
Command: debug ssh-server
no debug ssh-server
Function: Display SSH server debugging information; the ―no debug ssh-server‖
command stops displaying SSH server debugging information.
Default: This function is disabled by default.
Command mode: Admin Mode.
1.1.8 enable
Command: enable
disable
Function: Use enable command to enter Admin Mode from User Mode, disable
command exits admin mode.
Command mode: User Mode/ Admin Mode.
Default: None.
Usage Guide: To prevent unauthorized access of non-admin user, user authentication is
required (i.e. Admin user password is required) when entering Admin Mode from User
Mode. If the correct Admin user password is entered, Admin Mode access is granted; if 3
consecutive entry of Admin user password are all wrong, it remains in the User Mode. Set
the Admin user password under Global Mode with ―enable password‖ command.
Example:
Switch>enable
Switch#
1.1.9 enable password
Command: enable password [0 | 7] <password>
no enable password
Function: Configure the password used for enter Admin Mode from the User Mode,
The ―no enable password‖ command deletes this password.
Parameter: password is the password for the user. If input option 0 on password setting,
the password is not encrypted; if input option 7, the password is encrypted.
Command mode: Global Mode
Default: This password is empty by system default
Usage Guide: Configure this password to prevent unauthorized entering Admin Mode. It
is recommended to set the password at the initial switch configuration. Also, it is