mac

351
Chapter 22 IPv6 Multicast Protocol
22.1 Commands for MLD Snooping Configuration
22.1.1 clear ipv6 mld snooping vlan
Command: clear ipv6 mld snooping vlan <1-4094> groups [X:X::X:X]
Function: Delete the group record of the specific VLAN.
Parameters: <1-4094> the specific VLAN ID; X:X::X:X the specific group address.
Command Mode: Admin Configuration Mode
Usage Guide: Use show command to check the deleted group record.
Example: Delete all groups.
Switch#clear ipv6 mld snooping vlan 1 groups
Relative Command: show ipv6 mld snooping vlan <1-4094>
22.1.2 clear ipv6 mld snooping vlan <1-4094>
mrouter-port
Command: clear ipv6 mld snooping vlan <1-4094> mrouter-port [ethernet
IFNAME|IFNAME]
Function: Delete the mrouter port of the specific VLAN.
Parameters: <1-4094> the specific VLAN ID; ethernet the Ethernet port name; IFNAME
the port name.
Command Mode: Admin Configuration Mode
Usage Guide: Use show command to check the deleted group record.
Example: Delete the mrouter port in vlan 1.
Switch# clear ipv6 mld snooping vlan 1 mrouter-port
Relative Command: show ipv6 mld snooping mrouter-port
22.1.3 debug mld snooping all/packet/event/timer/mfc
Command: debug mld snooping all/packet/event/timer/mfc
no debug mld snooping all/packet/event/timer/mfc
Function: Enable the debugging of the switch MLD Snooping; the ―no‖ form of this
command disables the debugging.