mac

352
Command Mode: Admin Mode
Default: The MLD Snooping Debugging of the switch is disabled by default
Usage Guide: This command is used for enabling the switch MLD Snooping debugging,
which displays the MLD data packet message processed by the switch——packet, event
messages——event, timer messages——timer,messages of down streamed hardware
entry——mfc,all debug messages——all.
22.1.4 ipv6 mld snooping
Command: ipv6 mld snooping
no ipv6 mld snooping
Function: Enable the MLD Snooping function on the switch; the ―no ipv6 mld snooping‖
command disables MLD Snooping.
Command Mode: Global Mode
Default: MLD Snooping disabled on the switch by default
Usage Guide: Enable global MLD Snooping on the switch, namely allow every VLAN to
be configured with MLD Snooping; the ―no‖ form of this command will disable MLD
Snooping on all the VLANs as well as the global MLD snooping
Example: Enable MLD Snooping under global mode.
Switch (config)#ipv6 mld snooping
22.1.5 ipv6 mld snooping vlan
Command: ipv6 mld snooping vlan <vlan-id>
no ipv6 mld snooping vlan <vlan-id>
Function: Enable MLD Snooping on specified VLAN; the ―no‖ form of this command
disables MLD Snooping on specified VLAN.
Parameter: <vlan-id> is the id number of the VLAN, with a valid range of <1-4094>.
Command Mode: Global Mode
Default: MLD Snooping disabled on VLAN by default
Usage Guide: To configure MLD snooping on certain VLAN, the global MLD snooping
should be first enabled. Disable MLD snooping on specified VLAN with the no ipv6 mld
snooping vlan vid command
Example: Enable MLD snooping on VLAN 100 under global mode.
Switch (config)#ipv6 mld snooping vlan 100
22.1.6 ipv6 mld snooping vlan immediate-leave