mac

356
Switch(config)#ipv6 mld snooping vlan 2 query-interval 130
22.1.13 ipv6 mld snooping vlan query-mrsp
Command: ipv6 mld snooping vlan <vlan-id> query-mrsp <value>
no ipv6 mld snooping vlan <vlan-id> query-mrsp
Function: Configure the maximum query response period. The ―no‖ form of this
command restores the default value.
Parameter: vlan-id: VLAN ID, the valid range is<1-4094>
value: the valid range is <1-25> secs .
Command Mode: Global Mode
Default: 10s
Usage Guide: It is recommended to use default value and if layer 3 MLD is in operation,
please make this configuration in accordance with the MLD configuration as possible.
Example:
Switch(config)#ipv6 mld snooping vlan 2 query-mrsp 18
22.1.14 ipv6 mld snooping vlan query-robustness
Command: ipv6 mld snooping vlan <vlan-id> query-robustness <value>
no ipv6 mld snooping vlan <vlan-id> query-robustness
Function: Configure the query robustness; the ―no‖ form of this command restores to the
default value.
Parameter: vlan-id: VLAN ID, the valid range is <1-4094>
value: the valid range is <2-10>.
Command Mode: Global Mode
Default: 2
Usage Guide: It is recommended to use default value and if layer 3 MLD is in operation,
please make this configuration in accordance with the MLD configuration as possible.
Example:
Switch(config)#ipv6 mld snooping vlan 2 query- robustness 3
22.1.15 ipv6 mld snooping vlan static-group
Command: ipv6 mld snooping vlan<vlan-id> static-group <X:X::X:X> [source<
X:X::X:X>] interface [ethernet | port-channel] <IFNAME>
no ipv6 mld snooping vlan <vlan-id> static-group <X:X::X:X> [source<
X:X::X:X>] interface [ethernet | port-channel] <IFNAME>