mac

381
Examples:
Switch#show access-group
interface name: Ethernet 1/1
IP Ingress access-list used is 100, traffic-statistics Disable.
interface name: Ethernet1/2
IP Ingress access-list used is 1, packet(s) number is 11110.
Displayed information
Explanation
interface name: Ethernet 1/1
Tying situation on port Ethernet1/1
IP Ingress access-list used is
100
No. 100 numeric expansion ACL tied to entrance
of port Ethernet1/1
packet(s) number is 11110
Number of packets matching this ACL rule
24.28 show firewall
Command: show firewall
Functions: Reveal configuration information of packet filtering functions.
Parameters: None.
Default: None.
Command Mode: Admin and Configuration Mode.
Examples:
Switch#show firewall
Firewall status: Enable.
Firewall default rule: Permit
Displayed information
Explanation
fire wall is enable
Packet filtering function enabled
the default action of firewall is permit
Default packet filtering function is permit
24.29 show ipv6 access-lists
Command: show ipv6 access-lists [<num>|<acl-name>]
Function: Show the configured IPv6 access control list.
Parameter:<num> is the number of specific access control list, the valid range is 500～
699, amongst 500～599 is digit standard IPv6 ACL number, 600～699 is the digit
extended IPv6 ACL number; <acl-name> is the nomenclature character string of a specific