mac

382
access control list, lengthening within 1～32.
Default: None.
Command Mode: Admin and Configuration Mode.
Usage Guide: When no access control list is specified, all the access control lists will be
displayed; in used x time（s） is shown the times the ACL had been quoted.
Example:
Switch #show ipv6 access-lists
ipv6 access-list 500(used 1 time(s))
ipv6 access-list 500 deny any-source
ipv6 access-list 510(used 1 time(s))
ipv6 access-list 510 deny ip any-source any-destination
ipv6 access-list 510 deny tcp any-source any-destination
ipv6 access-list 520(used 1 time(s))
ipv6 access-list 520 permit ip any-source any-destination
24.30 show time-range
Command: show time-range <word>
Functions: Reveal configuration information of time range functions.
Parameters: word assign name of time-range needed to be revealed.
Default: None.
Command Mode: Admin Mode
Usage Guide: When not assigning time-range names, all time-range will be revealed.
Examples:
Switch#show time-range
time-range timer1 (inactive, used 0 times)
absolute-periodic Saturday 0:0:0 to Sunday 23:59:59
time-range timer2 (inactive, used 0 times)
absolute-periodic Monday 0:0:0 to Friday 23:59:59
24.31 time-range
Command: [no] time-range <time_range_name>
Functions: Create the name of time-range as time range name, enter the time-range
mode at the same time.