mac

397
802.1x is enabled on ethernet Ethernet1/1
Authentication Method:Port based
Max User Number:1
Status Authorized
Port-control Auto
Supplicant 00-03-0F-FE-2E-D3
Authenticator State Machine
State Authenticated
Backend State Machine
State Idle
Reauthentication State Machine
State Stop
Displayed information
Explanation
Global 802.1x Parameters
Global 802.1x parameter information
reauth-enabled
Whether re-authentication is enabled or not
reauth-period
Re-authentication interval
quiet-period
Silent interval
tx-period
EAP retransmission interval
max-req
EAP packet retransmission interval
authenticator mode
Switch authentication mode
Mac Filter
Enables dot1x address filter or not
MacAccessList
Dot1x address filter table
dot1x-EAPoR
Authentication method used by the switch (EAP
relay, EAP local end)
dot1x-privateclient
Whether the switch supports the privateclient
802.1x is enabled on ethernet
Ethernet1/1
Indicates whether dot1x is enabled for the port
Authentication Method:
Port authentication method (MAC-based,
port-based, user-based)
Status
Port authentication status
Port-control
Port authorization status
Supplicant
Authenticator MAC address
Authenticator State Machine
Authenticator state machine status
Backend State Machine
Backend state machine status
Reauthentication State
Machine
Re-authentication state machine status