mac

438
After port ethernet1/3 of vlan3 receives PPPoE packet, circuit-id value of the added
vendor tag as ‖abcd eth 01/003:0003‖.
34.5 pppoe intermediate-agent circuit-id
Command: pppoe intermediate-agent circuit-id <string>
no pppoe intermediate-agent circuit-id <string>
Function: Configure circuit ID of the port, the no command cancels this configuration.
Parameter: <string>: circuit-id, the max character number is 63 bytes.
Command Mode: Port mode
Default: This configuration is null.
Usage Guide: This command configures circuit-id alone for each port, the priority is
higher than pppoe intermediate-agent identifier-string command.
Example: Configure circuit-id as abcd/efgh on port ethernet1/3 of vlan3.
Switch(config-if-ethernet1/3)#pppoe intermediate-agent circuit-id abcd/efgh
After port ethernet1/3 of vlan3 receives PPPoE packet, circuit-id value of the added
vendor tag as ‖abcd/efgh‖.
34.6 pppoe intermediate-agent identifier-string option
delimiter
Command: pppoe intermediate-agent identifier-string <string> option {sp | sv | pv |
spv} delimiter <WORD> [delimiter <WORD>]
no pppoe intermediate-agent identifier-string option delimiter
Function: Configure circuit-id of the added vendor tag, the no command deletes this
configuration.
Parameter: <string>: identifier-string, the max character number is 47 bytes.
{sp | sv | pv | spv}: This option can select the combination format for slot,
port, vlan, sp means slot and port, sv means slot and vlan, pv means port and vlan, spv
means slot, port and vlan.
<WORD>: The delimiter between slot, port and vlan, the range is (# | . | , | ; | :
| / | space). Note: There are two delimiter WORD in spv combo mode, the first delimiter
between slot and port, the second delimiter between port and vlan.
Command Mode: Global mode
Default: This configuration is null.
Usage Guide: This command is used to configure global circuit id, the priority is higher