mac

440
Command Mode: Port mode
Default: Untrust port.
Usage Guide: The port which connect to server must be configured as trust port. Note: At
least one trust port is connected to PPPoE server.
Example: Configure port ethernet1/1 as trust port.
Switch(config-if-ethernet1/1)#pppoe intermediate-agent trust
34.9 pppoe intermediate-agent vendor-tag strip
Command: pppoe intermediate-agent vendor-tag strip
no pppoe intermediate-agent vendor-tag strip
Function: Enable vendor-tag strip function of the port, the no command cancels this
function.
Parameter: None.
Command Mode: Port mode
Default: Disable vendor-tag strip function of the port.
Usage Guide: If the received packet includes vendor tag from server to client, strip this
vendor tag.
Note: 1. Must enable global pppoe intermediate-agent function.
2. It must be configured on trust port.
Example: Trust port ethernet1/1 enables vendor tag strip function.
Switch(config-if-ethernet1/1)#pppoe intermediate-agent trust
Switch(config-if-ethernet1/1)#pppoe intermediate-agent vendor-tag strip
34.10 show pppoe intermediate-agent access-node-id
Command: show pppoe intermediate-agent access-node-id
Function: Show the configured access node ID.
Parameter: None.
Command Mode: Admin mode
Default: The configuration information is null.
Usage Guide: This command is used to show access-node-id configured by user.
Example: Show access-node-id configuration information.
Switch#pppoe intermediate-agent access-node-id abcd
Switch#show pppoe intermediate-agent access-node-id
pppoe intermediate-agent access-node-id is : abcd