mac

445
Function: Enable/ disable the debugging that show the synchronization information of the
local clock.
Parameter: send: Enable the debugging that web portal sends the packet.
receive: Enable the debugging that web portal receives the packet.
all: Enable the debugging that web portal receives and sends the packet.
<ethernet IFNAME | IFNAME>: The port name.
The port name is null that means to enable all ports.
Command Mode: Admin Mode.
Default: There is no limitation.
Usage Guide: Enable the packet debugging of web portal authentication, the no
command disables the packet debugging.
Example: Enable the packet debugging of web portal authentication.
switch#debug webportal packet ?
all Send and receive packet information
receive Receive package information
send Send package information
switch#debug webportal packet all interface ethernet 1/1
Ethernet1/1 0 packet rx debug is on
Ethernet1/1 0 packet tx debug is on
35.6 ip dhcp snooping binding webportal
Command: ip dhcp snooping binding webportal
no ip dhcp snooping binding webportal
Function: Enable/disable dhcp snooping binding web portal function.
Parameter: None.
Command Mode: Port Mode.
Default: Disable the function.
Usage Guide: Enable dhcp snooping binding web portal function, the no command
disables the function.
Example: Enable dhcp snooping binding web portal function.
switch(config)#ip dhcp snooping binding enable
switch(config)#interface ethernet 1/1
switch(config-if-ethernet1/1)#ip dhcp snooping binding webportal