mac

466
transferring.
Parameter: <ring-id> is MRPP ring ID, the valid range is from 1 to 4096, if not specified
ID, it clears all of MRPP ring statistic information.
Command Mode: Admin Mode.
Default: None.
Usage Guide: None.
Example: Clear statistic information of MRPP ring 4000 of switch.
Switch#clear mrpp statistics 4000
38.3 debug mrpp
Command: debug mrpp
no debug mrpp
Function: Open MRPP debug information; ―no description‖ command disables MRPP
debug information.
Command Mode: Admin Mode
Parameter: None.
Usage Guide: Enable MRPP debug information, and check message process of MRPP
protocol and receive data packet process, it is helpful to monitor debug.
Example: Enable debug information of MRPP protocol.
Switch#debug mrpp
38.4 enable
Command: enable
no enable
Function: Enable configured MRPP ring, the ―no enable‖ command disables this enabled
MRPP ring.
Parameter:
Command Mode: MRPP ring mode
Default: Default disable MRPP ring.
Usage Guide: Executing this command, it must enable MRPP protocol, and if other
commands have configured, the MRPP ring is enabled.
Example: Configure MRPP ring 4000 of switch to primary node, and enable the MRPP
ring.
Switch(config)#mrpp enable
Switch(config)#mrpp ring 4000