mac

468
Parameter: <timer> valid range is from 1 to 100s.
Command Mode: MRPP ring mode
Default: Default configuration timer interval is 1s.
Usage Guide: The primary node of MRPP ring continuously sends Hello packet on
configured Hello timer interval, if secondary port of primary node can receive this packet in
configured period; the whole loop is normal, otherwise fail. Transfer node of MRPP ring
doesn‘t need this timer and configure.
Example: Configure hello-timer of MRPP ring 4000 to 3 seconds.
Switch(config)# mrpp ring 4000
Switch(mrpp-ring-4000)#hello-timer 3
38.7 mrpp enable
Command: mrpp enable
no mrpp enable
Function: Enable MRPP protocol module, the ―no mrpp enable‖ command disables
MRPP protocol.
Parameter: None.
Command Mode: Global Mode.
Default: The system doesn‘t enable MRPP protocol module.
Usage Guide: If it needs to configure MRPP ring, it enables MRPP protocol. Executing
―no mrpp enable‖ command, it ensures to disable the switch enabled MRPP ring.
Example: Globally enable MRPP.
Switch(config)#mrpp enable
38.8 mrpp poll-time
Command: mrpp poll-time <20-2000>
Function: Configure the query interval of MRPP.
Command mode: Global mode.
Usage Guide: Configure the query time to adjust the query interval of MRPP, the default
interval is 100ms.
Example: Set the query time as 200ms.
Switch(Config)# mrpp poll-time 200