mac

475
Usage Guide: None.
Example: Configure the description of ULPP group as switch.
Switch(config)# ulpp group 20
Switch(ulpp-group-20)# description switch
39.8 flush disable arp
Command: flush disable arp
Function: Disable sending the flush packets of deleting ARP.
Parameter: None.
Default: By default, enable the sending function of the flush packets which are deleted by
ARP.
Command mode: ULPP group configuration mode.
Usage Guide: If configure this command, when the link is switched, it will not actively
send the flush packets to notify the upstream device to delete the entries of ARP.
Example: Disable sending the flush packets of deleting ARP.
Switch(config)# ulpp group 20
Switch(ulpp-group-20)# flush disable arp
39.9 flush disable mac
Command: flush disable mac
Function: Disable sending the flush packets of updating MAC address.
Parameter: None.
Default: By default, enable sending the flush packets of updating MAC address.
Command mode: ULPP group configuration mode.
Usage Guide: If configure this command, when the link is switched, it will not actively
send the flush packets to notify the upstream device to update the MAC address table.
Example: Disable sending the flush packets of updating MAC address.
Switch(config)# ulpp group 20
Switch(ulpp-group-20)# flush disable mac
39.10 flush enable arp
Command: flush enable arp
Function: Enable sending the flush packets of deleting ARP.