mac

499
Usage Guide: None.
Example: To enable NTP authentication function.
Switch(config)#ntp authenticate
44.9 ntp authentication-key
Command: ntp authentication-key <key-id> md5 <value>
no ntp authentication-key <key-id>
Function: To enable/cancel NTP authentication function, and defined NTP authentication
key.
Parameter: key-id: The id of key, range is from 1 to 4294967295.
value: The value of key, range between 1 to 16 of ascii code.
Default: The authentication key of NTP authentication is not configured by default.
Command Mode: Global Mode.
Usage Guide: None.
Example: To define the authentication key of NTP authentication, the key-id is 20, the
md5 is abc.
Switch(config)# ntp authentication-key 20 md5 abc
44.10 ntp broadcast client
This command is not supported by the switch.
44.11 ntp broadcast server count
Command: ntp broadcast server count <number>
no ntp broadcast server count
Function: Set the max number of broadcast or multicast servers supported by the NTP
client. The no operation will cancel the configuration and restore the default value.
Parameters: number：1-100, the max number of broadcast servers.
Default: The default max number of broadcast servers is 50.
Command Mode: Global Mode.
Examples: Configure the max number of broadcast servers is 70 on the switch.
Switch(config)#ntp broadcast server count 70