mac

514
Time Type User Command
0w 0d 0h 2m Telnet/SSH admin show history all-users detail 192.168.1.2:1419
0w 0d 0h 1m Telnet/SSH admin show history all-users 192.168.1.2:1419
0w 0d 0h 1m Console Null show history all-users
0w 0d 0h 1m Console Null end
0w 0d 0h 1m Console Null ip address 192.168.1.1 255.255.255.0
0w 0d 0h 0m Console Null in v 1
0w 0d 0h 0m Console Null telnet-server enable
46.14 show logging buffered
Command: show logging buffered [level {critical | warnings} | range <begin-index>
<end-index>]
Function: This command displays the detailed information in the log buffer channel. This
command is not supported on low end switches.
Parameter: level {critical | warnings} means the level of critical information.
<begin-index> is the index start value of the log message, the valid range is 1-65535,
<end-index> is the index end value of the log message, and the valid range is 1-65535.
When only display logging buffered information of the line card must be added range
parameter, but the main control has not the request.
Command Mode: Admin and Configuration Mode.
Default: No parameter specified indicates all the critical log information will be displayed.
Usage Guide: Warning and critical log information is saved in the buffer zone. When
displayed to the terminal, their display format should be: index ID time <level> module ID
[mission name] log information.
Example 1: Display the critical log information in the log buffer zone channel and related
to the main control with index ID between 940 and 946.
Switch#show logging buffered level critical range 940 946
Example 2: Display all the information which level is warning in the log buffer zone
channel.
Switch#show logging buffered level warning
46.15 show logging executed-commands state
Command: show logging executed-commands state
Function: Show the state of logging executed-commands.