mac

515
Parameter: None.
Command Mode: Admin mode.
Default: None.
Usage Guide: Use this command to display the state (enable or disable).
Example:
Switch#show logging executed-commands state
Logging executed command state is enable
46.16 show logging source
Command: show logging source mstp
Function: Show the log information source of MSTP module.
Parameters: None.
Default: None.
Command mode: Admin and configuration mode.
Usage Guide: Check the log information source (include information channel, the
information severity level) by show logging mstp command.
Example: Show the log information source of MSTP.
Switch#show logging source mstp
system module log switch status:
Channel Onoff Severity
logbuff on warning
loghost on warning
terminal on warning
46.17 show memory
Command: show memory [usage]
Function: Display the contents in the memory.
Parameter: usage means memory use information.
Command mode: Admin Mode
Usage Guide: This command is used for switch debug purposes. The command will
interactively prompt the user to enter start address of the desired information in the
memory and output word number. The displayed information consists of three parts:
address, Hex view of the information and character view.