mac

command restores the default timeout value for SSH authentication.

Parameter: <timeout> is timeout value; valid range is 10 to 600 seconds.

Command mode: Global Mode

Default: SSH authentication timeout is 180 seconds by default.

Usage Guide: This command is used to set SSH authentication timeout, the default

timeout is 180 seconds.

Example: Set SSH authentication timeout to 240 seconds.

Switch(config)#ssh-server timeout 240

1.2.17 show ssh-server

Command: show ssh-server

Function: Display SSH state and users which log on currently.

Command mode: Admin Mode.

Example:

Switch#show ssh-server

ssh server is enabled

ssh-server timeout 180s

ssh-server authentication-retries 3

ssh-server max-connection number 6

ssh-server login user number 2

1.2.18 show telnet login

Command: show telnet login

Function: Display the information of the Telnet client which currently establishes a Telnet

connection with the switch.

Command Mode: Admin and Configuration Mode.

Usage Guide: Check the Telnet client messages connected through Telnet with the

switch.

Example:

Switch#show telnet login

Authenticate login by local