mac

525
Chapter 48 Commands for Debugging
and Diagnosis for Packets Received
and Sent by CPU
48.1 clear cpu-rx-stat protocol
Command: clear cpu-rx-stat protocol [ <protocol-type> ]
Function: Clear the statistics of the CPU received packets of the protocol type.
Parameter: <protocol-type> is the type of the protocol of the packet, including dot1x, stp,
snmp, arp, telnet, http, dhcp, igmp, ssh
Command Mode: Global Mode
Usage Guide: This command clear the statistics of the CPU received packets of the
protocol type, it is supposed to be used with the help of the technical support.
Example: Clear the statistics of the CPU receives ARP packets.
Switch(config)#clear cpu-rx-stat protocol arp
48.2 cpu-rx-ratelimit channel
This command is not supported by the switch.
48.3 cpu-rx-ratelimit enhanced
This command is not supported by the switch.
48.4 cpu-rx-ratelimit protocol
Command: cpu-rx-ratelimit protocol <protocol-type> <packets>
no cpu-rx-ratelimit protocol <protocol-type>
Function: Set the max rate of the CPU receiving packets of the protocol type, the no
command set the max rate to default.
Parameter: <protocol-type> is the type of the protocol, including dot1x, stp, snmp, arp,