mac

528
 Command ―policy‖. Deleted commands and parematers for double-barrel mode.
 Deleted ―Double-barrel mode: ― and command also deleted.
 In the desctiption to the ―accounting‖ command removed ―single-barrel mode, ‖
and ‖under double-barrel mode packets of three colors will be present.
“in-profile” – green color is displayed. “out-profile” – red and yellow color.‖
 In command ―mls qos queue wrr weight <weight0..weight3>‖ removed ―wrr‖.
 Added ―DHCP option82‖ operation and command
 Added operation and command for ―DHCPv6 option37, 38‖.
 ACL at the example:
o Case 1, case 2, case 3 and case 4 were deleted in the configuration steps of
―firewall default permit‖ command line.
o In the result of the case 1 configuration ―access-list 110(used 1 time(s)‖
was changed to ―access-list 110(used 1 time(s)) 1 rule(s)‖
o In the configuration steps of the case 4 deleted ―ipv6 enable‖ command
line.
 added ―DHCP option82‖ operation and command
 added operation and command for ―DHCPv6 option37, 38‖.
 ―{ip|ipv6|mac|mac-ip} access-group‖ command mode changed to port
configuration mode.
 Do not support {ip|ipv6|mac|mac-ip} access-group (interface mode)
command
 VLAN-ACL in every chapter of the command guidance added ―this switch does
not support outgoing filtering‖
 ―vacl ipv6 access-group‖ in the command guidance added ―do not support IPv6
extention‖
 After ―ipv6 dhcp snooping trust‖ example the last string changed to ―ipv6 dhcp
snooping trust‖ and after ―ipv6 nd snooping trust‖ example the last string
changed to ―ipv6 nd snooping trust‖
 added ―authentication mab‖ command
 Added ―Web Portal‖, ―VLAN-ACL‖, ‖SAVI‖ features operation and commands.
 Deleted ―firewall default‖ command and operation manual in the ACL
configuration function order (2) instruction for the configuration of default action
(default action).
 ―dot1x port-method‖ added ―userbased standard‖ value and the same changes
applied to the operation manual.