mac

83
Switch#show cluster members id 1
Cluster Members:
ID: 1
Member status: Inactive member (user_config)
IP Address: 10.254.254.2
MAC Address: 00-01-02-03-04-06
Description: S9820
Hostname: DSW102
2.16 show cluster candidates
Command: show cluster candidates [nodes-sn <candidate-sn-list> | mac-address
<mac-addr>]
Function: Display the statistic information of the candidate member switches on the
command switch
Parameter: candidate-sn-list：candidate switch sn, ranging from 1 to 256. More than one
switch can be specified.
mac-address： mac address of the candidate switch
Default: No parameters means to display information of all member switches.
Command Mode: Admin and Configuration Mode.
Usage Guide: Executing this command on the switch will display the information of the
candidate member switches.
Example: Display configuration information of all cluster candidate switches.
Switch#show cluster candidates
Cluster Candidates:
SN Mac Description Hostname
--- ----------------- ------------------------ ------------------------
xxx xx-xx-xx-xx-xx-xx xxxxxxxxxxxxxxxxxxxxxx24 xxxxxxxxxxxxxxxxxxxxxx24
1 00-01-02-03-04-06 ES3528M
2 01-01-02-03-04-05 ES3528M MIS_zebra
2.17 show cluster topology
Command: show cluster topology [root-sn <starting-node-sn> | nodes-sn
<node-sn-list> | mac-address <mac-addr>]
Function: Display cluster topology information. This command only applies to
commander switches.