Product Manual

ManualsBrandsIPA ManualsLight TestersLight Ranger MUTT RV and Utility-Type Trailer Light Tester

LIMITED ONE YEAR WARRANTY

SATISFACTION GUARANTEED

#9101 LIGHT RANGER MUTT

Mobile Universal Trailer Tester

Innovative Products of America

Incorporated has established a Limited One Year

Warranty Policy for the Light Ranger MUTT

#9101, not including any wearable parts,

i.e., clips, etc.

One Year Limited Warranty/Return or Replace Policy: The product is covered for

one year from the date of the original user’s purchase under the stipulations of the Stan-

dard Warranty.

The product is warranted to be free from defects in workmanship or material. If there

is a problem due to workmanship or material defect, Innovative Products of America

Incorporated will repair or replace the product within 24 working hours after it is re-

ceived by the IPA

Repair Service Center. If it is determined that the product has been

tampered with or altered in any way, the warranty is void and all claims against the prod-

uct will not be honored. The Warranty Repair/Return procedures require that the proof of

purchase must be established (either by warranty card from the seller or by point of pur-

chase receipt/invoice) and the manufacturer makes every attempt to return ship the prod-

uct, prepaid freight, within three business days from the receipt of the returned product.

If it has been determined that the tool has been damaged due to misuse, Innovative

Products of America

Incorporated will repair the tool at a cost we deem reasonable and

these charges will be the responsibility of the user. We truly want you to be happy with our

products, so if you have any questions, call us toll-free at 888-786-7899

9101-MANUAL-IPA-2016-V

-02-02

ﬁ ed or distributed without the express prior written permission of the copyright holder. For permission, contact info@ipatools.com.

Innovative Products of America

Inc.

www.ipatools.com

845-679-4500 / 888-786-7899

234 Tinker Street Woodstock, NY 12498

ORIGINAL EQUIPMENT MANUFACTURER (OEM) USA

Innovative Products of America

Incorporated

888-786-7899 • 234 Tinker Street, Woodstock, NY 12498 • www.ipatools.com

Mobile Universal Trailer Tester

#9101

LIGHT RANGER MUTT

or distributed without the express prior written permission of the copyright holder. For permission, contact info@ipatools.com.

OPERATOR’S MANUAL

Tests 7 Spade, 6 Round and 4/5 Pin Connections.

Uses Internal 12 Volt Motorcycle Battery.

(Battery Not Included)

Summary of content (6 pages)

PAGE 1
LIMITED ONE YEAR WARRANTY SATISFACTION GUARANTEED Mobile Universal Trailer Tester #9101 LIGHT RANGER MUTT® #9101 LIGHT RANGER MUTT® Mobile Universal Trailer Tester Innovative Products of America® Incorporated has established a Limited One Year Warranty Policy for the Light Ranger MUTT® #9101, not including any wearable parts, i.e., clips, etc.
PAGE 2
#9101 LIGHT RANGER MUTT® PARTS LETTER FROM THE PRESIDENT OF IPA® Fig. 1 - Parts Diagram My name is Peter Vinci and I am the president of IPA®. I would like to first thank you for your interest in IPA®’s product line and share my commitment to you, our products and our policies. In today’s world, we have all experienced the lack of service and consideration demonstrated by many companies after you buy their products.
PAGE 3
1. Plug the 3-way adapter into the 7-way socket on the Ranger MUTT®. THE FOLLOWING SAFETY ALERT SYMBOLS ARE USED IN THIS MANUAL. 2. Be sure to push firmly until the key is down far enough for the flap to lock in behind it. 3. Plug the trailer into the proper terminal on the 3-way adapter. NOTE: The 5 pin connector also works for 4 pin trailer sockets. 4. To begin testing the trailer, turn the control knob to the desired circuit (as indicated on the faceplate). 5.
PAGE 4
ACID BURNS Wrong circuit is powered on trailer. The trailer is not wired to standard specifications. If possible, rewire trailer connector to match the Ranger MUTT® diagrams. I do not hear the trailer’s electric brakes engaging. Trailer electric brakes often do not make noise when engaging. You must safely jack up the trailer and spin the wheel while applying the brake to verify proper operation. Another method is to check amperage load. Most electric brakes draw approximately 1.5 amps per wheel.
PAGE 5
SHORT CIRCUIT AND OVERLOAD TESTING SPECIFICATIONS Short Circuit: When a positive power source (12V +) is directly connected to or touching the ground (-), wire insulation can wear through due to vibration; exposed copper wire can make contact with the metal trailer frame resulting in a short circuit and a blown fuse in the vehicle.
PAGE 6
NOTE: Use the supplied battery charger or charger input no greater than 10 amps to fully charge the internal battery of the tester. It may take up to 12 hours to charge a fully drained battery. WARNING: NEVER OPERATE TESTER WITH BATTERY VOLTAGE LESS THAN 11.5V. OPERATING ELECTRONIC DEVICES ON LOW VOLTAGE MAY SHORTEN LIFE OF AND CAUSE DAMAGE TO INTERNAL COMPONENTS. IDEAL BATTERY VOLTAGE IS 12.0V DC TO 12.5V DC. SET-UP • Chock trailer wheels to avoid rolling.