Ipason Computers Manual en.ipason.com Manufacturer: Wuhan Ipason Technology Co., Ltd. Address: Ipason Technology Park, No.1 Qingwu Avenue, Huangpi District, Wuhan City, Hubei Province, China 430000 E-mail: service@ipason.com VER：PP1.
I. Important Safety Information 1.1 Before using this Manual, it is very important to read and understand all relevant safety information of this product. Please check "Safety Guide" included with this product for the latest safety information. 1.2 Reading and understanding such safety information helps reduce the risk of personal injury or damage to the product.
II. Instructions and Precautions Before Use Before using this product, please be sure to read the following precautions to avoid product damage or personal injury due to human negligence. Please keep this Manual for future use and product packaging (including outer box and foam) for after-sales service. Before use, please check whether parts of the product are complete and whether there is any damage.
Computer rear interface Audio Network card PS/2 DVI-D USB 3.0 Connection of peripherals 1. Connect keyboard cable, mouse cable, earphone cable and sounder cable; 2.Connect the video output cable between monitor and host: Note that if no discrete graphics card is available for the host, directly connect to the rear interface of the host as shown in the figure below; if a discrete graphics card is provided, connect the video output cable to the interface that matches the discrete graphics card.
Startup and shutdown of host Press the switch on the front of the host to turn on the product. The power indicator is always on, and the hard disk indicator is flashing. Press the restart button to restart. Steps to shut down the system using Windows: Click Start, and then click Shut Down. 3 2 1 4 IV. Common Faults and Solutions I.
If you find any of the following conditions (although these conditions are unlikely), or have concerns about the safety of the product, before explaining the situation to the Customer Support Center for further guidance, please stop using the product and disconnect it from the power supply and remote communication lines. The power cord, extension cord, plug, power adapter, or power supply is cracked, broken, or damaged. There are signs of overheating, smoke, sparks, or fire.
Check your product for dust accumulation at least once every three months. Before inspecting the product, please turn off the power and unplug the power cord from the power socket; then remove the dust from the vents and seams in the baffle. Dust on the radiator inlet fins, power supply vents, and fans should also be removed. VI. Working Environment The best working environment for this product is voltage 200-240V, 50-60Hz, temperature 0°C-35°C, humidity 35%-80%, atmospheric pressure 86kPa-106kPa.
VII. After-sales Service Warranty Solutions 1. Warranty solutions In case of failure, the product shall be repaired first. When feasible, we may attempt to diagnose and resolve your product failures via the Internet, telephone, or other remote assistance methods. If some problems can be resolved by installing the specified software updated or product replacements by yourself, we will guide you to obtain and install such software updates or product replacements.
Ipason product standard warranty statement Nothing in this document excludes or limits the rights of consumers, nor does it lessen or absolve us from our responsibility to consumers. If the relevant laws have other requirements for the matters specified in this document, the laws shall be executed to the extent prescribed by the laws. The term "we" used in this document means Ipason, product sellers and service providers. 1.
Precautions for sending back To ensure data security, please make sure to back up the important data. Our company does not provide data backup and recovery services, and does not assume corresponding legal responsibilities. In case of return or replacement, you must return the product together with original packaging. Do not stick any labels on the original packaging (if there is a problem with the original packaging, the manufacturer will not replace it and only repair it).
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
