Wireless Handheld Keyboard and Mouse Touchpad Operation Manual Rev. 1.
Using Wireless Handheld Keyboard and Mouse Touchpad the very first Handheld Keyboard and Mouse Touch Pad This section explains what you can do with a Wireless Handheld Keyboard and Mouse Touchpad. How it works and what the benefits are to the purchaser.
convenience of using their personal computer from more convenient locations and in more convenient configurations, like sitting in your favorite easy chair or on your bed while watching Internet TV and controlling your viewing options without having to get up and manually operate the computer from the keyboard console.
7 8 1 14 1
NUMBERED FUNCTION OPERATION FEATURE LED 1 RECHARGER INDICATOR LIGHT GOES OUT WHEN FULLY CHARGED LED 2 CONNECTED TO EXTERNAL LIGHTS WHEN CONNECTED POWER SOURCE LED 3 RF STATUS BLINKS WHEN TRANSMITTING LED 4 BATTERY POWER LIGHT ON WHEN WEAK, LIGHT OFF WHEN STRONG LED 5 CAPS LOCK OR INPUT WHEN PRESS “CAP”, THIS LED SWITCH KEY BLINKING CONTINUOUSLY. WHEN FIXED WITH LED ON THIS MEANS THAT YOU HAVE SELECTED SWITCH INPUT TO THE ALTERNATIVE KEY MEANINGS.
Starting Wireless Handheld Keyboard and Mouse Touchpad Starting up this hardware and application is simple. 1. Plug the USB adaptor into any available USB port. 2. Power on the Wireless Handheld Keyboard and Mouse Touchpad by moving the slide switch as shown by arrow 8. 3. Wait 30 seconds. LED 3 will light up and then go out, this is normal.
6. Switch between upper-case and lower-case input mode: If you are in lowercase input mode, press key This way you can turn to upper-case input mode , LED 5 will blink at an interval about 1 second. In order to return to lower-case input mode pressing the key again after you completed your upper-case input, the LED 5 goes out. Every time, completed your uppercase input, please switch to lower-case input mode immediately, if waiting for the device enters sleep mode, LED 5 status will be incorrect. 7.
though you were using your mouse pad. Watch the mouse move to where you want it, and then use the keyboard for whatever action you desire. You can draw patterns using the TMP if you have installed MS Paint, ScreenPen or other Paint software. 11. Rarely but possible if two or more Wireless Handheld Keyboard and Mouse Touchpad are within a close proximity the units may get confused. In that situation you need to run an ID Code Verification procedure. This is very simple process.
the Wireless Handheld Keyboard and Mouse Touchpad with the USB Adaptor. You must then repeat this process until both units pair together. This process usually takes one time. We recommend that you are near your computer during this process. The Wireless Handheld Keyboard and Mouse Touchpad will operate in parallel with your existing keyboard and mouse. Any of the keyboards or mice will operate equally and simultaneously without interference or any configuration. This is truly a plug and play product.
Caution : Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Compliance statement: 1: This device is verified to comply with Part 15 of the FCC Rules. Operation subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
