User Manual Bluetooth Handheld Keyboard Model: KP-810-06BTT UnisenGroup www.unisengroup.
Let us familiar with the Bluetooth Handheld Keyboard 2 1 3 10 4 5 9 6 8 7 11 12 13
NUMB ERED FEATURE LED 1 LED 2 LED 3 ARRAW 4 ARRAW 5 ARROW 6 FUNCTION OPERATION RECHARGER INDICATOR LIGHT GOES OUT WHEN FULLY CHARGED RF STATUS SHIFT and CAP LOCK INPUTINDICATOR CAPS LOCK KEY THE SF KEY IS FOR THE INPUT SWITCH KEY KEY “Fn” BLINKS WHEN TRANSMITTING 1.LED3 FASHES SLOWLY WHEN PRESS CAP LOCK KEY 2. LED3 WITH STEADY ON WHEN PRESS SHIFT KEY CAPS LOCK ON/OFF SWITCH KEY, WATCH LED # 3 MOST KEYS HAVE TWO INPUT OPTIONS. PRESS THIS KEY WHEN YOU WANT TO SWITCH TO THE SECOND KEY MEANING.
What is Bluetooth Handheld Keyboard and what is it for? Bluetooth Handheld Keyboard i s the smallest Bluetooth Keyboard in the world for the moment, with built-in Bluetooth Device,Bluetooth Handheld Keyboard p rovides wireless short range communication with other Bluetooth device instead of physical cable connection that traditionally link electronic devices. Bluetooth Handheld Keyboard p rovides a so much convenient and capable tool for iPAD , smart mobile phone and tablet PC.
2. Arrow 5 points to the Input Switch Key When this key is pressed LED 3 will light up. This LED will stay on until this key is pressed again. That means while this light is on any key you press will use its secondary input rather than its primary input. For example the key Q is normally "Q" or "q", but when you press the SF key it becomes the number "~". When you have selected the Input Switch Key LED 3 will light up with a steady on. When you are in normal mode LED3 will be turned off. 3.
Connect to iPhone: Apple IOS 4 for iPhone is officially suppor t Bluetooth keyboard in the OS now.
Connect to mobile Microsoft Windows Mobile OS Note: Instructions below are for mobiles running WM6.0 and earlier OS, For WM6.1 and later OS, just use the mobile built-in Bluetooth to connect the Bluetooth Handheld Keyboard directly. 1. Copy the driver to your mobile device: insert driver CD and locate “Windows Mobile”==> “Windowsmobile.cab” then copy this file to your mobile device 2. Locate the CAB file and run the windowsmobile.cab file to start the installation on your mobile device.
>Then click “search and connect”, the software will automatically finds the bluetooth keyboard and build the connection, then you will see your bluetooth keyboard’s name at the bottom. Then you can use your bluetooth keyboard now. Re-build connection: if your device lost connection with your keyboard, message saying: keyboard disconnected will display on the bottom.you can re-build the connection by pushing the bluetooth reset button (arrow 13) Nokia Symbian OS 1.
WEEE Directive & Product Disposal: At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal. Notice to customers: This symbol on the battery indicates that the battery is to be collected separately. The following apply only to users in European countries.