Bluetooth Handheld Keyboard (with option of Laser Pointer) User Manual Model: KP-810-10BTT Rev. 1.0 - Multi-language supporting - Multi-touch&Scrolling bar - Google TV Keybaord www.unisengroup.
Introduction: this Bluetooth Handheld keyboard consists of keyboard, mouse touchpad, and laser pointer(optional) which is designed small and portable size. It provides people a unique & capable tool to operate their personal computer wirelessly.
1 17 2 16 18 15 19 3 F12 14 F10 F 11 13 F4 F5 F6 F7 F8 F9 12 21 F3 11 F2 5 20 F1 4 6 7 8 9 ON OFF 10
NUMBERED FEATURE FUNCTION ARROW 1 LASER EMITTER OPERATION PRESS LASER BUTTON(SEE ARROW 19) TO ACTIVE IT ARROW 2 TOUCH PAD SLIDE YOUR FINGER TO MOVER MOUSE ARROW 3 SCROLL BAR SLIDE YOUR FINGER ON THIS AREA TO SCROLL PAGE YOU VIEWING ARRAW 4 BLUETOOTH RESET PRESS THIS KEY TO RE-BUILD BLUETOOTH CONNECTION ARRAW 5 BACKLIT BUTTON PRESS TO POWER ON /OFF BACKLIT LIGHT ON WHEN CHARGING AND OFF WHEN FULLY RECHAGED ARROW 6 LED1 ARROW 7 LED2 LIGHT ON WHEN CONNECTED TO EXTERNAL POWER SOURCE ARROW
1. Pairing and establishing connection with computor. Windows XP/2000 Let's take Microsoft Bluetooth Software as an example to describe Bluetooth Search,Pairing and Connection, other Bluetooth software please refer to its own user manual. 1.1 Insert Bluetooth adaptor into any vacant USB port on your computor, please be patient to wait system search and install new hard driver. Then bluetooth icon will appear on the taskbar.
1.6, When the wizard asks you which passkey you want to use, click “Choose a passkey for me”. Then click “Next”. 1.7 After you are prompted to enter your passkey, please type the passkey on Bluetooth Handheld Keyboard, and then press Enter. You also can choose no passkey to go next step. PLEASE DO REMEMBER TO USE THE KEY OF BLUETOOTH HANDHELD KEYBOARD WHEN INPUT PASSKEY 1.8, In the final page of the wizard, click Finish, it maybe take a few seconds for new hardware driver installation before click finish.
Windows 7 Plug bluetooth receiver into any vacan USB port on your computor, please be patient to wait the system recognize your device, it maybe take several minutes. When new hardware has finished driver installation, an icon will appear in the task bar. Right click icon of bluetooth, select “Add a Device” An window like below will popup indicating that system is search a devie to add...
Turn iPazzPort on by sliding the power switch to ON, LED3 will flash one time, then press key “bluetooth reset” till LED3 flash. Bluetooth iPazzPort and Bluetooth Keyboard will appear in the window. Select it and click “Next” Bluetooth Reset LED3 Then you will be promoted to input a pass code for your device, please do type the code with iPazzPort, then press Enter NOTE:1. Do not tap key “Bluetooth Reset” or you will disconnect its connection during operation. 2.
Star ting Bluetooth Handheld Keyboard 1. The Bluetooth Handheld Keyboard has a battery saving feature. This feature puts the device into sleep mode if you do not use it for a long time. You can wake up the unit by pressing any key for one second. 2 Arrow 14 points to the Fn key. In order to bring users more convenience, the Bluetooth Handheld Keyboard also provides F1, F2,F3...F12 which operate like those keys on the standard keyboard.
5. When the backlit light up without any operation , this indicates your battery voltage has a low charge and needs to be recharged. The Bluetooth Handheld Keyboard is equipped with a re-chargeable battery. We have supplied you with a USB cable, which is plugged into a vacant USB slot on your computer and the bottom of the Bluetooth Handheld Keyboard, as indicated by arrow 20 . During charging LED1 will light up with steady on.
Multi-touch application: the touchpad supports various gesture, the related gesture and function is described below: Touchpad Function Moving Mouse Function Move Cursor Finger Gesture Finger Action Remark Slide one finger on the touchpad Scroll upward Middle botton click Vertical two finger scroll Right click Middle botton click Scroll middle key Right button click Tap the touchpad with two finger simultaneously Scroll downward Scroll pages quicky when browse website Slide two finger vert
Hand writing Bluetooth Handheld keyboard is equipped with large PAD for hand writing when used with the handwriting input software, SCREEN PEN is the right program for the people who want to have a speech, presentation, and training and want to emphasize his content on the screen, with the Bluetooth Handheld keyboard and software of SCREEN PEN, he can emphasize the words on the screen with circle, under line,×, √ as wish. This program is programed and fully owned by Unisengroup, 1.
WEEE Directive & Product Disposal At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment, or returned to the supplier for disposal Not i c e t o c u s t omers : This symbol on the battery indicates that the battery is to be collected separately. The following apply only to users in European countries.
And used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.
该款手持蓝牙键盘是本公司在前面无线键盘触摸板系列上增加的又一款新产品，继承了前 一系列产品结构简单，小巧，携带方便等特点，并在此基础上增加了激光笔，F1，F2，. . . F10 等功能键，集鼠标,键盘,以及激光笔等功能于一体,是当今世界上体积最小，功能最为齐全的一 款键盘，无论是会议主持演讲，教育培训，还是家庭电脑娱乐，拥有一款蓝牙键盘激光笔，会 让你轻松自如地远距离控制你的电脑。是一款真正的电脑遥控器. 作为一款新型的蓝牙键盘，采用蓝牙无线连接技术,遥控达10米半径范围. 该蓝牙手持键盘采用QWERTY式键盘布局, 包含了标准键盘所有常用功能键和字符键, 方便实用 该产品的触摸板采用电容感应式触摸板,为你的提供准确的鼠标指针定位. 与分体式鼠标 一样的方便使用,亦可进行多媒体会议或演讲手写标注. 一, 特点与规格: 1. 蓝牙无线连接：Bluetooth v 2.0、Bl uetooth H ID v 1.0. 2. 支持背光灯显示。 3.QWERTY 键盘布局 4.充电：DC5V/300mA 5. 内置锂电池，超长时间待机（约600小时）. 6. 内置激光笔。 7. 造型小巧, 57*150*12.
三 ，主 要 功能 键布局 以及 说 明 1 17 2 16 18 15 19 3 F12 14 F10 F 11 13 F4 F5 F6 F7 F8 F9 12 21 F3 11 F2 5 20 F1 4 6 7 8 9 ON OFF 10
功能描述 操作描述 发射激光 1 激光头 2 触摸板 3 滚动条 用手指在此区上下移动以快速移动页面 4 蓝牙重启键 单击以重新使键盘处于可连接状态 5 背光灯开关按键 用手指触摸以移动鼠标 单击以打开和关闭背光灯 6 LED1 充电指示灯，充满电时熄灭 7 LED2 外接电源指示灯 8 LED3 信号传输指示灯，数据传输过程中灯闪 9 LED4 转换到大写输入时灯亮， 10 电源开关 打开或关闭电源 11 开始菜单快捷键 单击以进入到开始菜单 12 快捷菜单按键 单击打开快捷菜单 13 组合键 “Ctrl, Alt, Del” 14 Fn 按键 配合其它的键同时操作 15 鼠标左键 鼠标左键 16 导航键 17 鼠标右键 鼠标右键 18 上，下翻页按键 上，下翻页按键 19 激光开关按键 20 MINI USB 充电接口 21 触摸换向按键 同时按住Fn和Enter键等于同时 按住普通键盘上CTRL, ALT,DEL三个键 上，下，左，右移动鼠标 打开或关闭激光 充电 当键盘使用方向改变
四.使用 说明 1 连 接建 立：首 先要 确 定你 要连接 的电 脑 是否 具 有蓝 牙功能 ，如 果 没有 的话， 你必 须 要有 一个蓝 牙适 配 器使 之与电 脑相 连 接。 1 .1打 开电 脑中 蓝 牙通 信 软件,使 之处 于 可搜 寻其它 蓝牙 设 备的 状态.具体 操作 请 参 考 其蓝 牙 设备 说明书.这 里所 描 述的 只是作 为参 考 。打 开“控 制面 板 ”， 找到 蓝 牙设 备 图标 ，右击 该图 标 ，选 择 “打 开”， 在弹 出 来的 对话框 里单 击 “贴 加 ”， 在 接下 来弹出 的对 话 框中 选 择“ 我设备 已连 接 并设 置好， 可以 查 找” 然 后单 击 “下 一步” 。电 脑 会自 动 搜索 已打开 的其 它 蓝牙 设备。 1 .2 拔 动蓝 牙键 盘 的开 关 至ON处,打 开电源.单 击一 下蓝牙 重启按 键直到LED 3闪 烁 然后松 开该 键 ，LED3闪几秒钟 后熄 灭 。这 说明蓝 牙键盘 与电 脑 已建 立连接 注 ： 在 操作 过程中 ，不 要 再按 蓝牙重 启键 ， 否则 连 接会 断开的 ， 1 .
2 键 F n的使用. F n是配合以下键使用的：F1,F2...F12, E NTER， Ins, PrtScr, Home, End, Del, 以 及触摸板换向键（箭头22），使用时，同时按住 Fn键，以及你想要操作的那个按键，比如： 在 标准键盘上，同时按住CTRL+ALT+DEL三个键就可以进行重启，任务管理，等操作，在该无 线 键盘上，你只需要同时按住Fn以及Enter就可以。 3 充电: 该无线键盘激光笔配有内置锂电池，如果在开机状态下，没有进行任何的操作，背光灯 自动闪亮,那说明该无线键盘激光笔已处于低电压,需要充电,将 USB 线的一头插入到电脑主机的 上USB接口，另一头插到无线键盘激光笔上的Mini USB 插孔，1号指示灯会亮。充电满时1号指示 灯自动熄灭，LE D2会亮，这时拔掉USB充电线，LED2会熄灭. 4 背光灯:该无线键盘配有背光灯，如果你在黑暗或光线较暗的环境下操作，你可以单击背光灯按 按 钮（箭头5)打开背光灯，同样再按一次该键即可关闭背光灯。 5.
五，多点触摸应用: 多点触摸应用说明如下图： 触摸功能 等效鼠 标功能 移动 移动鼠标 光标 图示 图示描述 备注 在触摸板上滑动 手指 向上 中键单击 中键单击 同时用两个手指 在触摸板上单击 向下 在浏览网页时双指 单击会出现滚动条 如上图所示，将光标 移至该图上方则向上快速 移动页面，反之则向下 两手指垂直 方向移动 右击 滚动鼠标 中键 鼠标右击 两手指垂直 方向移动 三个手指同时单 击 在浏览图片时，两 个手指向上、下移 动可以放大或缩小 画面
