R User Manual iPazzPort Universal Remote Model:KP-810-19R/19VR Rev. 1.0 www.iP azzPo rt.
Contents .......................................................... 1 Introduction Package ................................................................. 2 ................................................................. 2 Feature Specifications ........................................................... 2 System Requirement ................................................ 2 Power Switch .......................................................... 3 .......................................
Introduction Congratulations on your purchase of iPazzPort Universal wireless Remote Control.iPazzPort Universal wireless Remote consists of keyboard, mouse touchpad, and Universal IR remote which is designed small and portable size.It provides people a unique & capable tool to operate their personal computer wirelessly.
Package Wireless Keyboard with Universal IR remote USB Receiver USB cable for recharding the unit User Manual Feature R.F 2.4G connection Rechargeable lithium-ion battery USB receiver, Plug and play Ultra sensitive mouse touchpad QWERTY keyboard Universal IR remote control Integrated wireless microphone and speaker (optional for 19VR) Specifications Battery capacity: 400mA Charge voltage: DC 5V/300mA Standby time: 400 hours Size: 158mm*60mm*15.
Power Switch Insert USB receiver into USB prot in the computer,system will find new hardware “ Wireless Audio HID Device” and will install driver automatically, Turn unit on after driver installation successfully by switching power button to on, LED will flash one time then go out. That means your keyboard and computer have built connention and they are paired.
Button Functions 21 20 19 18 22 17 16 15 14 13 3 4 10 ENTER TV/VCR 9 8 7 0 6 5 4 11 CC 3 9 2 SLEEP OK Page Down 8 1 - CH + Page Up VOL PIP MENU GUIDE REPEAT 5 6 7 - 2 VCR 1 TV SETUP 25 + QUIT MUTE TOGGLE DVD 24 INFO SAT 23 12 Note: The REC button must be pressed twice to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for three seconds.
1. Red Indicator Lights when any I R button is pressed or Blue indicator Lights when the audio feature is activated(optional for KP-810-19VR) 2. SETUP Used for setup. 3. TV, VCR, DVD, etc. Selects product to be operated. 4. GUIDE brings up the DVD Title Menu screen.Displays on-screen program guide. 5. MENU brings up the DVD disc Menu screen - use with the UP, DOWN, LEFT & RIGHT navigation buttons.T-CENTRAL The TiVo key for TiVo Central. 6. REPEAT Replays the last 8 seconds of a program. 7. PIP. 8.
SAT Functions GUIDE button displays on-screen Satellite Channel Guide. CHANNEL + and CHANNEL -buttons perform the “Page +” and “Page -” function for on-screen Guide Menus used by some Satellite systems. INFO button brings up Satellite Display screen for current Channel and system information. MENU brings up the Satellite Menu screen-use with the UP,DOWN,LEFT & RIGHT navigation buttons. OK button is used for on-screen Menu selection. QUIT button is used to Exit or Clear on-screen Menu displays.
Function description of keyboard KEY R.F F1 F2 Back Space F3 F4 F5 F6 F7 F8 F9 Touch PAD F10 F11 F12 Indicator 8. Front view Page up/down Item Function Mouse left Navigator Mouse right Operation Mouse left Mouse left Press to operate like left mouse key Mouse right Mouse right Press to operate like right mouse key Key R.F Press to pair keyboard and USB receiver Key R.
Binds keys description all binds key must work with Fn, for example: if you want to operate key “Home”, you have to press key “Fn” and key “9” together F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 8. Front view Work with other binds keys Press this key and other binds key together Change operation directions Press “Esc” and “Fn” together Key R.
Setup Battery Saver Your remote automatically turns off if the buttons are depressed more than 30 seconds. This will save your batteries should your remote get stuck in a place where the buttons remain depressed (e.g., between the sofa cushions). Code Saver Codes are stored in permanent memory while you are changing batteries so you will not lose any codes stored in the remote while you are changing batteries. Power-On Default The remote powers on in TV mode.
Code Search If your product does not respond after you have tried all the codes for your brand, or if your brand is not listed,try searching for your code by following these steps. 1. Manually turn on the device (TV, VCR, etc.) to be controlled. 2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button. 3. Press and quickly release the desired mode button (TV, VCR, etc.). The red indicator blinks off once. 4.
5. Press the CHANNEL UP button ((or POWER or PLAY (VCR only)) repeatedly until the device to be controlled changes channel. The red indicator blinks off with each button press. If you accidentally overshoot the code required, press the CHANNEL DOWN button to backtrack through the library until the device changes channel. Pressing CHANNEL UP changes direction to forward again. 6. Press and release MUTE to install the code. Brand Search Method entry is now complete.
Controlling Combo Devices Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) have separate buttons on the original remote to select the part of the Combo device to be controlled.For example, if your Combo device is a DVD/VCR then its original remote might have separate DVD and VCR buttons for selection of the Combo part you would control. The equivalent button functions can be found on your Philips remote by using the device Mode and SETUP buttons.
VCR/DVD/DVR Punch-Through Feature This remote allows the 6 VCR transport buttons (i.e.PLAY, PAUSE, STOP, FF, REWIND, and REC) to Punch-Through control from any Mode programmed with TV, SAT or Cable codes to the last VCR, DVD or DVR programmed Mode you used. Normally other types of remotes only punch-through (from another Mode) on the 6 VCR buttons to the device programmed under the VCR Mode button. This is not much use if you are using a DVD programmed under a Mode other than VCR.
Setting ALL Volume/Mute Control to any one Mode This routine can set all Modes to “punch-through” to any one chosen Mode for Volume/Mute button control without the needing to change to that Mode. 1. Press and hold the SETUP button until the red indicator turns on, then release the button. 2. Press and hold the MUTE button until the red indicator blinks off, then release the button. 3. Press and release the desired Mode button (TV,VCR, etc.) for Volume/Mute control, the red indicator blinks then stays on. 4.
Troubleshooting Remote does not operate your product. 1.Press the mode button of the product you want to control. 2. Program the remote with a new code. 3. Install new batteries. (You might have to reprogram your remote after installing new batteries.) 4. Remote may not be compatible with your product. Remote does not operate some features of your product. 1.Program remote with a new code. 2.Remote may not be able to operate all features of your product or button names might be different than your product.
2 Change audio output settings: when pluging USB receiver into USB port on the computer system will set wireless audio HID device as default audio output device, and you only can hear sound from computer by the wireless keyboard, So if you want to set other audio device as output device, please follow below steps to change its settings:==> start==> settings==>control panel==>sound,audio and devices ==> change speaker settings, in the following popup window, please change the default audio output device to o
