User Guide

Connecting to Your Computer via USB

You can use VZ-X with your computer (Mac/PC/Chromebook) via USB. You may use it with IPEVO Visualizer or other compatible third

party software. If your computer is connected to a projector, you can then project the live image from VZ-X to a large screen. To use

VZ-X with your computer, please:

Connect the included Micro-USB cable to the Micro-USB port of VZ-X. Then, connect the other end of the cable to the USB port of your

computer.

Check the Mode Switch of VZ-X. Make sure you’ve switched it to USB/HDMI mode.

Turn VZ-X on using the Power Switch.

Launch IPEVO Visualizer or any compatible third party software of your choice. A live image should appear on your computer. VZ-X is

now ready for use.